unisonic technologies co., ltd utt4407 preliminary power mosfet www.unisonic.com.tw 1 of 4 copyright ? 2011 unisonic technologies co., ltd qw-r502-554.a p-channel enhancement mode power mosfet ? description the utc utt4407 is a p-channel enhancement mode power mosfet using utc?s advanced trench technology to provide customers with a minimum on-state resistance and extremal low gate charge with a 25v gate rating the utc utt4407 is universally applied in pwm or used as a load switch. ? features * v ds(v) = -30v * i d = -12a(v gs =-20v) * r ds(on) < 13m ? @v gs = -20v, r ds(on) < 14m ? @v gs = -10v ? symbol drain gate source p-channel ? ordering information ordering number lead free halogen free package packing utt4407l-s08-r utt4407g-s08-r sop-8 tape reel utt4407l-s08-t UTT4407G-S08-T sop-8 tube note: pin assignment: g: gate d: drain s: source
utt4407 preliminary power mosfet unisonic technologies co., ltd 2 of 4 www.unisonic.com.tw qw-r502-554.a ? pin configuration drain 8 7 6 5 1 2 3 4 gate source drain drain drain source source
utt4407 preliminary power mosfet unisonic technologies co., ltd 3 of 4 www.unisonic.com.tw qw-r502-554.a ? absolute maximum ratings (t a = 25c, unless otherwise specified) parameter symbol ratings unit drain-source voltage v dss -30 gate-source voltage v gss 25 v t a = 25c -12 continuous(note 2) t a = 70c i d -10 drain current pulsed (note 3) i dm -60 a t a = 25c 3 power dissipation (note 2) t a = 70c p d 2.1 w junction temperature t j +150 c storage temperature t stg -55~+ 150 c note: 1. absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. 2. device mounted on 1in 2 fr-4 board with 2oz. copper, t = 10sec. 3. repetitive rating, pulse width limited by junction temperature. ? thermal characteristics (t a = 25c) parameter symbol ratings unit junction to ambient (note ) ja 75 c/w note: device mounted on 1in 2 fr-4 board with 2oz. copper, t = 10sec.
utt4407 preliminary power mosfet unisonic technologies co., ltd 4 of 4 www.unisonic.com.tw qw-r502-554.a ? electrical characteristics (t j =25c, unless otherwise noted) parameter symbol test conditions min typ max unit off characteristics drain-source breakdown voltage bv dss v gs =0 v, i d =-250a -30 v v ds =-24v,v gs =0 v -1 drain-source leakage current i dss v ds =-24v,v gs =0 v,t j =55c -5 a forward v gs =+25v,v ds =0v +100 gate- source leakage current reverse i gss v gs =-25v,v ds =0v -100 a on characteristics gate threshold voltage v gs(th) v ds =v gs , i d =-250 a -1.7 -2.5 -3 v v gs =-10v, i d =-10a 11 14 m ? v gs =-10v,i d =-10a,t j =125c 15 19 m ? v gs =-20v, i d =-10a 10 13 m ? drain-source on-state resistance r ds(on) v gs =-4.5v, i d =-10a 24 m ? dynamic parameters input capacitance c iss 2076 2500 output capacitance c oss 503 reverse transfer capacitance c rss v ds =-15 v, v gs =0v, f=1mhz 302 pf gate resistance r g v ds =0v, v gs =0v, f=1mhz 2 3 ? switching parameters total gate charge q g 37.2 45 gate source charge q gs 7 gate drain charge q gd v ds =-15v,v gs =-10v, i d =-12a 10.4 nc turn-on delay time t d(on) 12.4 turn-on rise time t r 8.2 turn-off delay time t d(off) 25.6 turn-off fall-time t f v ds =-15v, v gs =-10v, r l =1.25 ? , r gen =3 ? 12 ns source-drain diode ratings and characteristics drain-source diode forward voltage v sd i s =-1a, v gs =0v -0.72 -1 v maximum continuous drain-source diode forward current i s -4.2 a body diode reverse recovery time t rr i f =-12 a, di/dt=100a/ s 33 40 ns body diode reverse recovery charge q rr i f =-12a, di/dt=100a/ s 23 nc utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
